‘where your power is determined with feeling’

JPL-PRESSES

WE THINK IN SOLUTIONS

SUSTAINABLE PRESSES

The press is made out of a firmly welded and rigid C-frame with a very low deflection factor. Press operation is always safe and easy thanks to the robust handwheel on the side of the press. Thanks to the interchangeable adaptors, the presses are suitable for several duties, such as aligning, mounting of bearings, broaching, punching, cutting, bordering, folding, or bending.

PRESSING WITH FEELING

By turning the handwheel to the left or right, both the movement and the speed can be controlled simultaneously and very accurately. Also, the force exercised on the workpiece will be variable. When the handwheel is released, the force on the workpiece gets reduced to the minimum again.

SAFETY FIRST

Through internal engineering, we can offer a safe pressing solution that meets all requirements. Machine safety is taken into account here. The press is equipped with a handwheel, so it can be used without additional safety measures. An action of the handwheel instantly results in a reaction on the surface to be pressed. This makes the press safe to use. All our presses are delivered with a user manual and CE certification.

STRONG IN CUSTOM-MADE WORK

Do you have specific requests or demands? In addition to the standard models, JLP Presses also has the so-called specials. These specials are developed upon request of the customer and together with him. Because the engineering, hydraulics, operating technology, and manufacture are internally managed, a total product can be realised quickly.

LOW-MAINTAINANCE THROUGH QUALITY

JPL Presses are very low-maintenance. This is partly a result of the very robust design and of the high-quality parts. Controlling the oil level is all that is needed before using the press for the first time. If you want to include the press in your production line, it is important that it keeps functioning properly. In the unlikely event that something does go wrong, our technical service department can repair failures quickly and adequately.

AUTOPILOT

JPL Presses also offers the option to completely automate a press. By using numerical control, you can make a JPL press work automatically. Stop points of the cylinder movement can be configured on the basis of position (0.1mm accuracy), as well as force (1kN accuracy) on the PLC control. You have the following options:

  • Manual operation without intervention of control
  • Manual operation with intervention of control on the basis of force and/or length
  • Single Automatic
  • Continuous Automatic

NC manual operation is easy with the joystick on the control panel; position and force can be followed live on the display. This enables working with high precision. When using single automatic, the press makes the programmed stroke once and on continuous automatic it will repeat it until a stop instruction is given.

C150-100kN

10 tons of pressing force

150mm max. overhang

C250-150kN

15 tons of pressing force

250 mm max. overhang

C300v-250kN

25 tons of pressing force

300 mm max. overhang

C300-400kN

40 tons pressing force

300 mm max. overhang

C300v-250kN

25 tons pressing force

300 mm max. overhang

HC200-100kN

10 tons of pressing force

table model

U300-300kN

30 tons of pressing force

300 mm max. overhang

Specials

custom-made work

short lines